Skip to Main Content
Home / Blog / Die Springs / Need Small Springs? – 5 Ways We Can Help

Need Small Springs? – 5 Ways We Can Help

1. We have comprehensive small spring manufacturing capabilities.

We are your experienced spring manufacturer with comprehensive small springs manufacturing capabilities. We complete all phases of spring manufacture including design, fabrication, and finishing processes.

Stock Small Springs – When it comes to springs, W.B. Jones has the best selection of off-the-shelf springs to meet most application needs. It is easy to search our stock spring inventory to find the length, diameter, rate, material and load strength you need.

Custom Small Springs – If one of our stock small springs does not meet your needs we will make custom small springs to your specifications. Get access to design assistance through our highly qualified design team. We will create springs to meet your requirements and work within your budget.

2. We can make a small sized spring from your sample.

When you need a new supply of small springs we can replicate a spring you already have. All we need is a sample and we will obtain the accurate measurements needed to make it. Our smallest stock is.088” OD and our smallest in stock wire diameter is.007”, but if a smaller spring is required, we can accommodate your needs.

3. Our team can provide assistance with your small spring application.

We manufacture springs for a broad range of applications and assemblies including those used in appliances, electronic devices, medical equipment, and much more. We calculate the spring rate as well as the maximum load and travel. In the case of an overstressed spring design, we’ll figure out how to change the specs to avoid spring failure. You will be assured of springs that will fit and work appropriately.

4. We are happy to fill orders of any size.

W.B. Jones does not have a minimum order requirement, so whether you need two small springs or 200, your shipment will arrive to you in one to two weeks. Expedited shipping in 24 to 72 hours is also available when needed.

5. We make small springs from a variety of materials.

W.B. Jones makes springs from music wire, stainless steel (types 302, 304, 316), spring brass, and phosphor bronze in spring tempered form. The tempering process involves the cold extrusion of wire to increase its strength and reduce the need to harden the spring once wound.

Need small springs? Contact us to get your springs delivered fast.


Share this


Speak with a spring specialist today.
859-581-7600