W.B. Jones Spring Company:torsion stainless steel springs manufacturer
WB Jones torsion spring manufacturer coil springs, compression springs manufacturer, torsion springs, extension springs, die springs, stainless steel spring supplier manufacturing industrial springs


products: Custom-Made Torsion Springs


torsion springs manufacturer For new designs and changes to existing designs we suggest you call and talk to one of our design specialists. There are many questions that need to be answered to supply you with a torsion spring that works and is cost effective. Our design specialists are trained to help you answer these questions.

For existing designs we ask that you fax or email a current print or send a sample. With a good pair of dial calipers you can measure the spring and fill in the information required below.

Any Questions?


Request for Quote Form

1 Type of Material:   2 Wire Diameter:

If other, please specify

should be in thousandths of an inch and not a gauge number
3
Outside Diameter: or
Inside Diameter:
only fill in one of these as the other can be calculated
  4 Relationship of legs:
click for help
5 Number of Coils:
this should end in 1/4 if 90 degrees, 1/2 if 360 degrees, 3/4 if 270 degrees or an even number if 180 degrees		   6
Length of Leg #1:   and
Length of Leg #2:  
fill in both
7 Direction of Wind:   8 Finish:
click for help
9
Other information that is not required but helpful if known:

the size of the rod it fits over  
the maximum temperature
the maximum rotation
10
Quantity Range*       to  
11
Your Contact Information    *= Required Field

Name*
Title
Company
Phone Number*
Fax Number
E-Mail Address*   


          
Please click "E-Mail Form" only once.




Home Page I  90 Year History I  Products I  Contact Us I  Glossary I  Site Map
© Copyright 2003 W.B. Jones Spring Co Inc. All Rights Reserved. Created by Upright Communications.