products: Custom-Made Compression Springs

For existing designs we ask that you fax or email a current print or send a sample. With a good pair of dial calipers you can measure the spring and fill in the information required below.

Any Questions?

1	Type of Material:		2	Wire Diameter:
	please choose one music wire hard drawn MB oil tempered wire stainless steel (302) phosphor bronze brass other If other, please specify	click for help music wire hard drawn MB oil tempered wire stainless steel (302) phosphor bronze brass		should be in thousandths of an inch and not a gauge number
3	Outside Diameter: or Inside Diameter: only fill in one of these as the other can be calculated		4	Free Length:
5	Total Coils: or Pitch: or Space between coils: only fill in one of these as the others can be calculated
6	Type of Ends:		7	Finish:
	please choose one closed not ground closed and ground open not ground open and ground	click for help closed not ground closed and ground open not ground open and ground		plain zinc plate black oxide shot peen passivate other
8	Other information that is not required but helpful if known: the size of the hole it fits into: the size of the rod it fits over: the maximum temperature: the maximum required deflection:
9	Quantity Range*       to
10	Your Contact Information    *= Required Field Name* Title Company Phone Number* Fax Number E-Mail Address*
Please click "E-Mail Form" only once.